Energy Efficient Lighting

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
M21 Solstice Module (1 X Plate)

$413.45

CHOOSE OPTION
image

Description

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED’s in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint with the M21 LED unit retrofit. Available as both retrofit and new architectural track and combo recessed fixtures.

New Lumen Maintenance Regulator Circuit

LED chips slightly degrade over time. The M21 LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000hrs +!

Switches and Onboard Programs

The M21 LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.

STD

The default setting unit is on all the time

561 energy saver program (sav)

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming the LED unit 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!

Dimm Sink (default)

This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.

Dimm Source

This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.

Wattage selection :

Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want.  Approximate wattages:

4 wattage selections by switch:

Mini 21 (1x) – 30W, 40W, 50W, 60W per 1x Mini unit.

Total wattage range 30W-60W


To further increase life of all components including the driver, we have programmed a gradual soft start up in MS (milliseconds). This technology provides excellent lumen maintenance and long lifetime to make frequent re-lamping a thing of the past – a promise that is backed up by a ten-year limited warranty.

The lamp and driver have been developed and tested in combination with each other, including key enhancements like thermal protection for the module. The module has been successfully implemented using LM-80 guidelines. As a result, they provide a great lumen output and light distribution, while efficacy upgrades can be implemented when available.

Future Proof Module

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.

Benefits

                New Lumen Maintenance Circuit

                Increased efficacies

                Color consistency increased

                Dimming options include 0-10V, Wireless

                Rated Life 100,000Hrs

                High Lumen Output

                Substantial energy savings

                Enables Intelligent controls and networking

                Small Footprint-4.50”

Applications

                Offices (areas such as hallways, receptions, boardrooms, etc.)

                Hotel lobbies and receptions areas

                Retail high-end shops

                Commercial/Industrial Interior Space (warehouses, garages)

                Commercial/Industrial Exterior Space (parking lots, streets, roadways)

Additional Protection

                24V Line Voltage Variation regulation

                Under Voltage Protection 21v Minimum

                Over Voltage Protection 30V shut off

                Reset 27V or lower

                Over Temp-thermistor-90C shut off

                Below 85C turns back on



END USER MODULE ADAPTERS & Fixtures

The M21 LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.

Warranty

Limited 10 - Year Warranty

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Specifications :

Solstice Mini (M21) Plate Retrofit Cut Sheet

Cut sheet M21 (Dec 2013)

Solstice Mini (M21) Yoke Retrofit Cut Sheet

GTSOLM21-SOLY-120-277

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
M21 Solstice Module (2 X Plate)

$680.33

CHOOSE OPTION
image

Description

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED's in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint with the M21 LED unit retrofit. Available as both retrofit and new architectural track and combo recessed fixtures. 

New Lumen Maintenance Regulator Circuit

LED chips slightly degrade over time. The M21 LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000hrs +!

Switches and Onboard Programs

The M21 LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.

STD

The default setting unit is on all the time

561 energy saver program (sav)

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming the LED unit 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!

Dimm Sink (default)

This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.

Dimm Source

This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.

Wattage selection :

Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want.  

Approximate wattages:

4 wattage selections by switch:

Mini 21 (2x) – 60W, 80W, 100W, 120W per 2x Mini unit.

Total wattage range 60W-120W


To further increase life of all components including the driver, we have programmed a gradual soft start up in MS (milliseconds). This technology provides excellent lumen maintenance and long lifetime to make frequent re-lamping a thing of the past – a promise that is backed up by a ten-year limited warranty.

The lamp and driver have been developed and tested in combination with each other, including key enhancements like thermal protection for the module. The module has been successfully implemented using LM-80 guidelines. As a result, they provide a great lumen output and light distribution, while efficacy upgrades can be implemented when available.

Future Proof Module

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.

Benefits

                New Lumen Maintenance Circuit

                Increased efficacies

                Color consistency increased

                Dimming options include 0-10V, Wireless

                Rated Life 100,000Hrs

                High Lumen Output

                Substantial energy savings

                Enables Intelligent controls and networking

                Small Footprint-4.50”

Applications

                Offices (areas such as hallways, receptions, boardrooms, etc.)

                Hotel lobbies and receptions areas

                Retail high-end shops

                Commercial/Industrial Interior Space (warehouses, garages)

                Commercial/Industrial Exterior Space (parking lots, streets, roadways)

Additional Protection

                24V Line Voltage Variation regulation

                Under Voltage Protection 21v Minimum

                Over Voltage Protection 30V shut off

                Reset 27V or lower

                Over Temp-thermistor-90C shut off

                Below 85C turns back on


END USER MODULE ADAPTERS & Fixtures

The M21 LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures. 

Warranty

Limited 10 - Year Warranty

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Specifications :

Solstice Mini (M21) Plate Retrofit Cut Sheet

Cut sheet M21 (Dec 2013)

Solstice Mini (M21) Yoke Retrofit Cut Sheet

GTSOLM21-SOLY-120-277

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
M21 Solstice Module (3 X Plate)

$969.09

CHOOSE OPTION
image

Description

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED’s in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint with the M21 LED unit retrofit. Available as both retrofit and new architectural track and combo recessed fixtures.


New Lumen Maintenance Regulator Circuit

LED chips slightly degrade over time. The M21 LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000hrs +!

Switches and Onboard Programs

The M21 LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.

STD

The default setting unit is on all the time.

561 energy saver program (sav)

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming the LED unit 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!

Dimm Sink (default)

This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.

Dimm Source

This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.

Wattage selection :

Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want.  


Approximate wattages:

4 wattage selections by switch:

Mini 21 (3x) – 90W, 120W, 150W, 180W per 3x Mini unit.

Total wattage range 90W-180W


To further increase life of all components including the driver, we have programmed a gradual soft start up in MS (milliseconds). This technology provides excellent lumen maintenance and long lifetime to make frequent re-lamping a thing of the past – a promise that is backed up by a ten-year limited warranty.

The lamp and driver have been developed and tested in combination with each other, including key enhancements like thermal protection for the module. The module has been successfully implemented using LM-80 guidelines. As a result, they provide a great lumen output and light distribution, while efficacy upgrades can be implemented when available.

Future Proof Module

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.

Benefits

                New Lumen Maintenance Circuit

                Increased efficacies

                Color consistency increased

                Dimming options include 0-10V, Wireless

                Rated Life 100,000Hrs

                High Lumen Output

                Substantial energy savings

                Enables Intelligent controls and networking

                Small Footprint-4.50”

Applications

                Offices (areas such as hallways, receptions, boardrooms, etc.)

                Hotel lobbies and receptions areas

                Retail high-end shops

                Commercial/Industrial Interior Space (warehouses, garages)

                Commercial/Industrial Exterior Space (parking lots, streets, roadways)

Additional Protection

                24V Line Voltage Variation regulation

                Under Voltage Protection 21v Minimum

                Over Voltage Protection 30V shut off

                Reset 27V or lower

                Over Temp-thermistor-90C shut off

                Below 85C turns back on


END USER MODULE ADAPTERS & Fixtures

The M21 LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.

Warranty

Limited 10 - Year Warranty

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Specifications :

Solstice Mini (M21) Plate Retrofit Cut Sheet

Cut sheet M21 (Dec 2013)

Solstice Mini (M21) Yoke Retrofit Cut Sheet

GTSOLM21-SOLY-120-277

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

 

hidden field
M21 Solstice Module (4 X Plate)

$1242.00

CHOOSE OPTION
image

Description

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED’s in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint with the M21 LED unit retrofit. Available as both retrofit and new architectural track and combo recessed fixtures. 

New Lumen Maintenance Regulator Circuit

LED chips slightly degrade over time. The M21 LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000hrs +!

Switches and Onboard Programs

The M21 LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.

STD

The default setting unit is on all the time.

561 energy saver program (sav)

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming the LED unit 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!

Dimm Sink (default)

This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.

Dimm Source

This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.

Wattage selection :

Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want.  


Approximate wattages:

4 wattage selections by switch:

Mini 21 (3x) – 120W, 160W, 200W, 240W per 4x Mini unit.

Total wattage range 120W-240W


To further increase life of all components including the driver, we have programmed a gradual soft start up in MS (milliseconds). This technology provides excellent lumen maintenance and long lifetime to make frequent re-lamping a thing of the past – a promise that is backed up by a ten-year limited warranty.

The lamp and driver have been developed and tested in combination with each other, including key enhancements like thermal protection for the module. The module has been successfully implemented using LM-80 guidelines. As a result, they provide a great lumen output and light distribution, while efficacy upgrades can be implemented when available.

Future Proof Module

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.

Benefits

                New Lumen Maintenance Circuit

                Increased efficacies

                Color consistency increased

                Dimming options include 0-10V, Wireless

                Rated Life 100,000Hrs

                High Lumen Output

                Substantial energy savings

                Enables Intelligent controls and networking

                Small Footprint-4.50”

Applications

                Offices (areas such as hallways, receptions, boardrooms, etc.)

                Hotel lobbies and receptions areas

                Retail high-end shops

                Commercial/Industrial Interior Space (warehouses, garages)

                Commercial/Industrial Exterior Space (parking lots, streets, roadways)

Additional Protection

                24V Line Voltage Variation regulation

                Under Voltage Protection 21v Minimum

                Over Voltage Protection 30V shut off

                Reset 27V or lower

                Over Temp-thermistor-90C shut off

                Below 85C turns back on


END USER MODULE ADAPTERS & Fixtures

The M21 LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.

Warranty

Limited 10 - Year Warranty

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Specifications :

Solstice Mini (M21) Plate Retrofit Cut Sheet

Cut sheet M21 (Dec 2013)

Solstice Mini (M21) Yoke Retrofit Cut Sheet

GTSOLM21-SOLY-120-277

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
M21 Solstice Module (Y - Bracket)

$321.60

CHOOSE OPTION
image

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Lumiled LED’s in 3 clusters. Optional hardware includes 5 optic packages to meet any FC/distribution requirement: 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint with the M21 LED unit retrofit. Available as both retrofit and new architectural track and combo recessed fixtures. 

 

 

New Lumen Maintenance Regulator Circuit

 

LED chips slightly degrade over time. The M21 LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 60,000 hrs +!

 

 

Switches and Onboard Programs

 

The M21 LED Module is preloaded with helpful programs designed to allow the customer to optimize each application with the flick of a switch.

 

 

STD

 

The default setting unit is on all the time.

 

 

561 energy saver program (sav)

 

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming the LED unit 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!

 

 

Dimm Sink (default)

 

This selection becomes handy when using a motion sensor or dimming switch. Sink means that you are using a dimming ballast or controller that provides the 10 v power and the control device adjusts the voltage for your needs. Most control devices are Sinking so if you do not know default to this switch setting.

 

 

Dimm Source

 

This is selected when the control device is providing the 0-10v power. Theatrical lighting and some large dimming panels provide the 0-10v power.

 

 

Wattage selection :

 

Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want.  


Approximate wattages:

 

  • 100% - 60w equivalent to 175w Metal Halide
  • 75% - 50w equivalent to 100w Metal Halide
  • 50% - 40w equivalent to 70w Metal Halide
  • 25% - 30w equivalent to 50w Metal Halide

 

To further increase life of all components including the driver, we have programmed a gradual soft start up in MS (milliseconds). This technology provides excellent lumen maintenance and long lifetime to make frequent re-lamping a thing of the past – a promise that is backed up by a 10-year limited warranty.

 

The lamp and driver have been developed and tested in combination with each other, including key enhancements like thermal protection for the module. The module has been successfully implemented using LM-80 guidelines. As a result, they provide a great lumen output and light distribution, while efficacy upgrades can be implemented when available.

 

 

Future Proof Module

 

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.

 

 

Benefits

 

•                New Lumen Maintenance Circuit

•                Increased efficacies

•                Color consistency increased

•                Dimming options include 0-10V, Wireless

•                Rated Life 100,000Hrs

•                High Lumen Output

•                Substantial energy savings

•                Enables Intelligent controls and networking

•                Small Footprint-4.50”

 

 

Applications

 

•                Offices (areas such as hallways, receptions, boardrooms, etc.)

•                Hotel lobbies and receptions areas

•                Retail high-end shops

•                Commercial/Industrial Interior Space (warehouses, garages)

•                Commercial/Industrial Exterior Space (parking lots, streets, roadways)

 

 

Additional Protection

 

•                24V Line Voltage Variation regulation

•                Under Voltage Protection 21v Minimum

•                Over Voltage Protection 30V shut off

•                Reset 27V or lower

•                Over Temp-thermistor-90C shut off

•                Below 85C turns back on


 

 

END USER MODULE ADAPTERS & Fixtures

 

The M21 LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.

 

 

Warranty

 

Limited 10 - Year Warranty

 

 

Color Logic

 

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

 

Code Color CRI Minimum Luminous Flux

GR - 5700 Kelvin (CRI 70) 220 lm

BR - 5000 Kelvin (CRI 80) 190 lm

YW - 4100 Kelvin (CRI 70) 210 lm

BL - 4000 Kelvin (CRI 80) 190 lm

RD - 3500 Kelvin (CRI 80) 190 lm

OR - 2700 Kelvin (CRI 80) 170 lm

PU - 3000 Kelvin (CRI 95) 130 lm

 

 

Specifications :

 

Solstice Mini (M21) Plate Retrofit Cut Sheet

Cut sheet M21 (Dec 2013)

 

Solstice Mini (M21) Yoke Retrofit Cut Sheet

GTSOLM21-SOLY-120-277

 

 

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
Solstice Module - 5498 (1 X Plate)

$610.12

CHOOSE OPTION
image

 

 

 

Description

Our Solstice units are designed to retrofit into almost any HID fixture using custom fabricated brackets and plates for easy plug and play installation. We can articulate our units and offer a wide array of innovative optics to deliver the light precisely where it’s needed. Dark Sky Compliant. Four way switchable power options on board. This unit also comes with an energy Saver program that is accessed via a switch on the board.

Some of our KEY features:

Multiple temperature control values. Over temperature protection, shut-down at critical temperature and resume operation temperature.


·       Soft start


·       0 – 10 V Dimming compatible


·       Under voltage lockout for power off or brownout


·       0-10v Input Port.


·       Occupancy sensing Current accuracy over the

·       LED operating-temperature range +/- 3%.

MagLev® Fan Technology

By using magnetic levitation force, these fans feature zero friction with no contact between shaft and bearing. 100,000 hours rated operating life, providing an exceptionally cool running LED unit -42˚ Celsius at ambient temperatures.

4 wattage selections by switch:

GTSOL5498 – 75W, 85W, 95W,**135W per Solstice unit.

Total wattage range 75W-135W
.

**Additional Driver Upgrade required for 135 watts.

Power Supply

50/60Hz ballast. Input voltage 120 – 277 V100w Step Down Ballast from input voltage to 24V to Solstice Unit.

480V / 100W Ballast also available.

*24V operation without power supply.

Input Voltages:

·       120vAC, 220 – 277vAC,

·       24vDC
480vAC,

·       24vDC
For Solar Powered Application – No Power Supply is required.

Operating Temperature Range:

-40 to +85 degrees Celsius.

Optics

Multiple optics options available for maximum light distribution, if needed. See our optics information page.

Distribution Pattern

Multiple mounting positions for a broad range of narrow to spread symmetrical lighting distribution choices.

Warranty

10 year limited warranty.

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
Solstice Module - 5498 (2 X Plate)

$982.00

CHOOSE OPTION
image

Description

Our Solstice units are designed to retrofit into almost any HID fixture using custom fabricated brackets and plates for easy plug and play installation. We can articulate our units and offer a wide array of innovative optics to deliver the light precisely where it’s needed. Dark Sky Compliant. Four way switchable power options on board. This unit also comes with an energy Saver program that is accessed via a switch on the board.

Some of our KEY features:

Multiple temperature control values. Over temperature protection, shut-down at critical temperature and resume operation temperature.


·       Soft start


·       0 – 10 V Dimming compatible


·       Under voltage lockout for power off or brownout


·       0-10v Input Port.


·       Occupancy sensing Current accuracy over the

·       LED operating-temperature range +/- 3%.

MagLev® Fan Technology

By using magnetic levitation force, these fans feature zero friction with no contact between shaft and bearing. 100,000 hours rated operating life, providing an exceptionally cool running LED unit -42˚ Celsius at ambient temperatures.

4 wattage selections by switch:

GTSOL5498 (2x) –150W, 170W, 190W, **270W per 2x Solstice unit.

Total wattage range 150W-270W


**Additional Driver Upgrade required for 270 watts.

Power Supply

50/60Hz ballast. Input voltage 120 – 277 V100w Step Down Ballast from input voltage to 24V to Solstice Unit.

480V / 150W and 480V / 300 W Ballasts also available.

*24V operation without power supply.

Input Voltages:

·       120vAC, 220 – 277vAC

·       24vDC
480vAC

·       24vDC
For Solar Powered Application – No Power Supply is required.

Operating Temperature Range:

-40 to +85 degrees Celsius.

Optics

Multiple optics options available for maximum light distribution, if needed. See our optics information page.

Distribution Pattern

Multiple mounting positions for a broad range of narrow to spread symmetrical lighting distribution choices.

Warranty

10 year limited warranty.

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field
Solstice Module - 5498 (3 X Plate)

$1452.53

CHOOSE OPTION
image

Description

Our Solstice units are designed to retrofit into almost any HID fixture using custom fabricated brackets and plates for easy plug and play installation. We can articulate our units and offer a wide array of innovative optics to deliver the light precisely where it’s needed. Dark Sky Compliant. Four way switchable power options on board. This unit also comes with an energy Saver program that is accessed via a switch on the board.

Some of our KEY features:

Multiple temperature control values. Over temperature protection, shut-down at critical temperature and resume operation temperature.


·       Soft start


·       0 – 10 V Dimming compatible


·       Under voltage lockout for power off or brownout


·       0-10v Input Port.


·       Occupancy sensing Current accuracy over the

·       LED operating-temperature range +/- 3%.

MagLev® Fan Technology

By using magnetic levitation force, these fans feature zero friction with no contact between shaft and bearing. 100,000 hours rated operating life, providing an exceptionally cool running LED unit -42˚ Celsius at ambient temperatures.

4 wattage selections by switch:

GTSOL5498 (3x) –225W, 255W, 285W, **405W per 3x Solstice unit.

Total wattage range 150W-270W


**Additional Driver Upgrade required for 405 watts.

Power Supply

50/60Hz ballast. Input voltage 120 – 277 V100w Step Down Ballast from input voltage to 24V to Solstice Unit.

480V / 150W and 480V / 300 W Ballasts also available.

*24V operation without power supply.

Input Voltages:

·       120vAC, 220 – 277vAC

·       24vDC
480vAC

·       24vDC
For Solar Powered Application – No Power Supply is required

Operating Temperature Range:

-40 to +85 degrees Celsius

Optics

Multiple optics options available for maximum light distribution, if needed. See our optics information page.

Distribution Pattern

Multiple mounting positions for a broad range of narrow to spread symmetrical lighting distribution choices.

Warranty

10 year limited warranty

Color Logic

Replace STANDARD COLOR CODE "GR" with one of the Color Codes Below. Be Sure to Note the Special Color Chip Adder.

Code Color CRI Minimum Luminous Flux

GR 5700 Kelvin CRI 70 220 lm

BR 5000 Kelvin CRI 80 190 lm

YW 4100 Kelvin CRI 70 210 lm

BL 4000 Kelvin CRI 80 190 lm

RD 3500 Kelvin CRI 80 190 lm

OR 2700 Kelvin CRI 80 170 lm

PU 3000 Kelvin CRI 95 130 lm

Plate retrofit options are available for all fixtures. We have prefabricated plates available for many fixtures already, call our office with the model number of your fixture and we will check our database and see if one is already available. If not, we can customize several installation options for your existing fixture.

hidden field

Social

       
      

Imagine Lighting Co.

 

Imagine Lighting Company has the knowledge and experience to make all your decorative lighting dreams come true! From Christmas light installation to landscape lighting, cabinet lighting and more, we will work with you to create a lighting design that will truly compliment your property.  

 

Lic # 942107

 

Site Map